Sheep Production Machines

(Automatic) Stomach Washing Machine (STM550)   
Sheep gut pulling Machine (SGP60)
Automatic Sheep Casing Line (60-120SSD4)
Hot Water Recycling System (HWR)
Cold Water Recycling System (CWR)
Measuring Machine (MM70)
Tubing Machine (TB2)
Salting- and netting machine (SNM200)
Salting- and bundling machine (SBM200)
Defatting/desliming Machine (DFM750)    
Washing machine (FWM5000)
(Automatic) Stomach Washing Machine (STM550)  
Tierce barrow   (FKR)
Washing Centrifuge
Pauch Washing Machine

(Automatic) Stomach Washing Machine (STM550)

This machine washes and deslimes stomachs and is also used for whitening beef stomachs. It is manufactured from high quality stainless steel and other corrosion resistant materials.

 Capacity:

  • up to 1200 / hour
  • motor 1.5 kW
  • Water 1 liter / stomach
Sheep gut pulling Machine

Sheep gut pulling Machine (SGP60)

This machine operates with a smooth, controlled movement to ensure that the gut is removed with a maximum yield and without any damage. With the SGP60 up to 25 intestines can be pulled of at the same time this giving a high output rate from one operator.

The gearbox has been carefully designed to give a very quiet machine operation as well as extremely low maintenance.

This machine is manufactured from high quality stainless steel and other corrosion resistant materials.

Technical data:

Capacity: 700 sheep/hour
Motor: 0,55 kW
Water consumption: 0,1 m³ / hour
Overall dimensions: 900 x 1000 x 1500 mm
Nett weight: 130 kg

Automatic Sheep Casing line

Automatic Sheep Casing Line (60-120SSD4)

Technical Data:

Type (SSD4)   60   80   100    120
Width (cm) 60 60 80 80 100 100 120 120
ASC 1 1 1 1 1 1 1 1
SFSC 1 2 1 2 1 2 1 2
Finisher/ Dethreader 1 1 1 1 1 1 1 1
Total Machines 3 4 3 4 3 4 3 4
Capacity (runners/h) 300

collected

300

fresh

400

collected

400

fresh

500

collected

500

fresh

600

collected

600

Fresh

Smaller capacities are available as also universal cleaning lines for multiple species.
Hot water (35°C) Consumption
without HWR (m³/h) 1.8 2.4 2.2 3.0 2.8 3.8 3.4 4.6
with HWR(m³/h) 0.36 0.48 0.44 0.6 0.56 0.76 0.68 0.92
Coldwater Consumption
without CWR(m³/h) 0.6 0.6 0.6 0.6 0.8 0.8 1.0 1.0
with CWR(m³/h) 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1
Power (kW) 7.0 9.2 7.0 9.2 7.0 9.2 7.0 9.2
HWR Pump (kW) 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
HWR Fat paddle Motor (kW) 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12
CWR Pump (kW) 1.85 1.85 1.85 1.85 1.85 1.85 1.85 1.85

 

ASC: Automatic Stripper/Crusher
SFSC: Side Feed Stripper/Crusher
HWR: Hot Water recycling System (35°C)
CWR: Cold Water Recycling System


Extra:

  • 24 Volt-switch panel (CE-Norm) for security

Optional:

  • Hot water recycling system: pump: 4.0 kW, fat paddle motor: 0.12 kW
  • Cold water recycling system pump: 1.85 kW
  • Automatic greasing system: All Rollers will be greased automatically, grease pump: 24 Watt.
  • DAFS dissolved air flotation system: 5.0 kW
  • Sheep gut Pulling machine SGP60: 0.55 kW.

Applying the hot and cold water recycling system will yield savings of 80 respectively 90 %

Hot Water Recycling system

Hot Water Recycling System (HWR)

This system can save up to 90 % water consumption during an 8 hour working day. The tank is up to 7.54 metres long and is positioned alongside the gut cleaning line.
Water flows out of the cleaning line tank through several overflow outlets into the hot water recycling tank.
The water settles down here which allows the mucosa to fall to the bottom and the fat to float on the surface, where it is scraped off by the nylon scraper blades.
The water flows through the heat exchanger area to bring the temperature back to the required level and then through two filters, before being pumped back into the gut cleaning system.

 

Technical data:

  • Fat scraper motor 0.12 kW
  • 4-Machines Line Pump 2,2 kW
  • 6-Machines Line Pump 4,0 kW
  • Heat exchanger 85 kg Steam 3 bar or Heater water 95°C 3,5 m³/hour in recirculation
  • Option: DAFS dissolved air floatation system 5.0 kW
Cold Water Recycling system

Cold Water Recycling System (CWR)

This tank recirculates cold water used on the finishing machine by passing the water through filters and settling areas before pumping it back to the finishing machine.

The system can save up to 90 % of the water used during an 8 hour working day.

Technical data

  • Pump 1,85 kW
  • Construction materials stainless steel 304 (AISI), nylon
Measuring Machine

Measuring Machine (MM70)

This machine can be used on hog, sheep and beef casings. The machine is simple to operate and extremely reliable. The rotating parts in the drive mechanism run in an oilbath. The length of the casings can be controlled to within 10 cm. The control unit is assembled separately from the main body and has the following features:

a. The control counter for setting the length.
b. An ends counter
c. Two bundle counters

  • for counting the days production
  • for counting different types of casings put through during the day.

Capacity:

  • 70 hank hog/sheep casing/hour
  • 150 bundle beef casings/hour
  • (1 hank = 91 metres, 1 bundle = 18 metres)

This machine is manufactured from high quality stainless steel and other corrosion resistant materials

Tubing Machine

Tubing Machine (TB2)

Tubing of casings (Hog, Beef, Sheep) is more and more taken over by sorting businesses in delivering the casings pre-tubed in order to facilitate the work of the sausage production.

In our programme we also offer a machine which is capable of tubing on two sides simultaneously.

Capacity:

  • 15-20 Hanks / Side / Hour
  • Length adjustable till 60 cm

The whole is solidly manufactured and needs little maintenance.

Salting- and netting machine

Salting- and netting machine (SNM200)

For use with sheep, hog, horse and beef casings. Manufactured from corrosion resistant stainless steel AISI 316. This machine features spreading pins to enable casings to receive an adequate covering. The machine consists of a salting table and a pulling machine.

There are two methods of processing:

  1. Catching the salted casings into nets
  2. Catching the salted casings into tanks leaving them for 24 hours to drain then load into barrels using the pulling machine

Capacity

  • 180 bundles hog/sheep runners / hour
  • 450 bundles beef/horse casings / hour

As an alternative we can supply the pulling machine with a 3-armed carousel with on every arm 2 tubes. This carousel comes instead of the 2 tubes underneath the pulling machine.

Salting- and bundling machine

Salting- and bundling machine (SBM200)

For use with sheep, hog, horse and beef casings. Manufactured from corrosion resistant stainless steel AISI 316. This machine features spreading pins to enable casings to receive an adequate covering. Salt loss is kept to a minimum as the surplus salt falling from the casing is retained and collected by the machine for re-use.

Capacity:

  • 1000 hog/sheep runners / hour (=ca. 225 Hanks)
  • 200 bundle beef/horse casings / hour
Defatting / Desliming Machine

Defatting/desliming Machine (DFM750)

This machine defats the beef bungs and deslimes the beef middles, the temperature of the water and the time the product spends in the machine is varied to suit the local condition of the product. Additional features such as a timer and mixer taps can be supplied. This machine is manufactured from high quality stainless steel and other corrosion resistant materials.


Technical Data:

Products:

  • chitterlings, fat ends, stomachs, beef middles, beef bungs

Motor:

  • 5.5 kW

Capacity:

  • 12-15 kg in 1 to 3 minutes

Water consumption hot and cold water supply required approx. 600 liters/ hour

Washing machine

Washing machine (FWM5000)

Our FWM5000 washing machine has been designed to gently wash soft red organs, such as lungs and kidney as also fatends and stomachs.
The mesh wash drum is driven by a worm transmission through a gear cluster. This ensures that load on and speed of the motor is greatly reduced.

Capacity: 50 kgs per cycle.
Including: 24 V Switch board CE-Norm, including emergency stop.
Water use: 800 ltr per hour.

The machine is manufactured from high quality stainless steel and other corrosion resistant materials.

Stomach washing machine

(Automatic) Stomach Washing Machine (STM550)

This machine washes and deslimes hog stomachs and is also used for whitening sheep paunches.
Also, the machine can be used to wash hearts tongues, tails, gullet and head meat.
It is manufactured from high quality stainless steel and other corrosion resistant materials.

Capacity:

  • 30 Litre per cycle
  • Motor 1.5 kW
  • Water 600 litre / hour
Tierce barrow

Tierce barrow   (FKR)

This tierce barrow is made of stainless steel (AISI 316) and is very stable.
The rubber wheels assembled have bearings which are closed up on two sides.

With this tierce barrow 99.9 % of the tierces in the market can be moved without any problem.

Capacity: 300 kg.
Dimensions: LxWxH: 1.500 x 800 x 385 mm

Washing Centrifuge

Washing Centrifuge

Our range of centrifuges is used to wash, de-hair, scald and/or refine any kind of offal and by-products of beef, sheep and hog such as paunch, rennet and book stomach, feet, head, mask, heart and many more.

Based on your demand we can offer a wide range of models suitable for your needs.

The machine can be fully automated and in that case free programmed to control the water temperature, water consumption and rotation speed.

The special-designed machines enable the inputs to be thoroughly cleaned. The machine is very easy to operate, clean and to be maintained.